HomeTechnologyHow to Improve Your Business's Network Performance with Network Cabling

How to Improve Your Business’s Network Performance with Network Cabling


Is slow internet making work hard? A study found that 91% of workers say sluggish networks make them less productive. That’s almost everyone! Fast, reliable networks are super important for any business. 

Network cables connect computers, phones, printers, and other gadgets. But not all cables are the same. The types of cables used impact speed, capacity, and reliability. Upgrading old or damaged cables is one of the best ways to make networks faster.

This article explains why modern cabling is good for business networks. It covers cable types, installation tips, and how new cables make things faster. Faster office connections enable employees to work more efficiently. Let’s check it out!

Why Network Cables Matter

Computers require physical connections to share information. Network cables are the wires that link devices. They carry all the data flowing through the system. Bad cabling causes major traffic jams. 

Signals move slowly over old or low-quality cables. This leads to lag, freezing, and errors. Here is a visual representation illustrating how outdated network infrastructure causes problems for businesses:

Data Source: Statista

Crumpy cabling also creates:

  • Dropped connections and failed transfers
  • Weak signals and corrupted data
  • More network congestion for wired and wireless

With modern cables, businesses keep communication fast and reliable. Employees don’t waste time waiting on pokey networks. Operations that need data flows stay efficient.

When upgrading cables, it’s advisable to partner with experienced local IT and cabling pros.  Cable companies in Coral Springs FL offer full cabling services for businesses in the area. Working with qualified experts ensures your upgrade is done right and makes networks faster.

Key Triggers of Suboptimal Network Performance

Sometimes network slowdowns sneak up on businesses. Networks gradually become sluggish over time. This hurts productivity and frustrates employees.

It’s important to watch for triggers that degrade network speed and reliability. Addressing these promptly avoids bigger problems down the road. Let’s look at key issues that hamper network performance:

1. Old Cabling – Cables wear out over time. Old copper cabling from the 1990s can’t handle modern network speeds. Time to upgrade!

2. Insufficient Cabling – Too few cables cause bottlenecks as more devices connect. Lag quickly results. Add cables before congestion hits.

3. Poor Cable Grades – Low-grade cables like Cat5 struggle with complex networks. Employees see glacial speeds. Use quality cables like Cat6a.

4. Damaged Cables – Kinks, frays, corrosion, and other cable damage slow connections. Inspect cabling for defects and replace them.

5. Weak Wireless Signals – Weak WiFi signals from aging routers or poor placement reduce speed. Boost with newer routers or range extenders.

6. Network Congestion – Too many users or data streams overload connections. Video, photos, and large files add congestion. Manage usage or increase capacity.

7. Old Network Gear – routers, switches, and modems degrade over time. Upgrade aging hardware for faster speeds.

8. Bandwidth Hogs – Some apps and devices consume more bandwidth, slowing other traffic. Control their usage with quality of service settings.

9. Malware and Viruses – Infected computers transfer malware, stealing bandwidth. Scan regularly and use antivirus software.

10. The Cloud – Cloud apps can lag if internet bandwidth is insufficient. Get connections that match cloud usage.

Watch for these red flags and optimize your network early. Nip problems in the bud before frustration sets in. With proactive improvements, your network will deliver the seamless speed employees need.

Modernizing Your Network Cabling

Is your business relying on old, outdated cabling? That slows down connections and hurts productivity. Modernizing cabling provides a big speed boost. Look at the table below to see the difference between modern data cables and old ones: 

Modern Network Cables Old Network Cables
Types Cat6, Cat6a, Cat7 Cat5, Cat5e
Speed Handle super fast speeds like 10Gbps Only handle slow speeds like 100Mbps
Network Capacity Great for complex networks Get overloaded easy
Traffic Flow Stop network traffic jams Cause lag and freezing
Connected Devices Allow way more devices to connect Limit how many devices can connect
Internet Speed Make internet lightning-fast Make internet crawl
Performance Avoid freezing and errors Cause lots of errors
Connectivity Keep connections stable Leads to dropped connections

Here are tips for upgrading your cables:

1. Assess Current Cabling – Survey existing cables to see what types you have and their condition. This shows what needs upgrading or replacing. Inspect carefully for damage.

2. Calculate Future Needs – Factor in company growth plans and future tech when cabling. More users and devices will be added. Allow plenty of capacity.

3. Select Top-Grade Cables – Forget Cat5 – it’s obsolete. Cat6 and Cat6a cables handle modern network demands and provide headroom. 

4. Allow For Wireless Too – Also run cables to WiFi access point locations. Wireless relies on a wired backbone. Plan enough ports.

5. Develop a cabling map – carefully plan out new cabling routes. Measure distances and order sufficient cable lengths. Mark access points.

6. Hire Experts –  Get qualified experts like certified low-voltage electricians for installation. They have the right tools and techniques.

7. Follow Standards – Adhere to TIA/EIA wiring standards so that cabling performs as rated. Don’t take shortcuts that could cause issues.

8. Label Thoroughly – Label both ends of each cable clearly. This avoids confusion when changes occur. Use a naming scheme like FloorPort.

9. Test Copper Cables – Use a cable tester to verify cabling works to specification with no defects. Document results.

10. Consider Your Pathways – Evaluate pathways for new cabling through ceilings, floors, and walls. Install conduit if necessary to ease fishing.

Leveraging a Wireless Mesh Architecture

Wireless access points set up in a mesh pattern can provide seamless Wi-Fi coverage across large offices and buildings. Here’s how it works:

The access points connect together to form a flexible mesh network. If one access point fails or gets overloaded with users, the mesh automatically routes signals via alternate paths. 

This creates built-in redundancy and eliminates Wi-Fi dead zones. Employees can move freely without losing connections.

Mesh networks are also easy to expand. Just plug in more access points to boost range and capacity. The mesh automatically incorporates the new access points – no reconfiguring is required.

Another benefit is higher throughput thanks to multiple simultaneous data streams across the mesh. Signals find the fastest route.

With a well-designed wireless mesh topology, businesses can provide campus-wide Wi-Fi coverage without slowdowns or dead spots as users move around. A mesh network boosts connectivity and convenience.

Using VLANs to Bolster Security

VLANs or Virtual Local Area Networks can boost network security. They divide up a physical network into separate logical networks. Devices on a VLAN only communicate with other devices in the same VLAN. This segmentation contains threats. 

If a device gets infected, the malware is trapped in that VLAN. It can’t spread to other parts of the network. VLANs also limit access. Wireless users can be put in a separate VLAN. Now they can only reach specific resources, not everything.

Other VLAN security tips:

  • Give VoIP phones their own VLAN. This protects against eavesdropping.
  • Put printers and other shared devices into a separate VLAN. Firewall this off for safety.
  • Make sure VLANs only span across trunk ports that need them. Don’t allow unnecessary access.
  • Use different VLANs for departments handling sensitive information. Contain any breaches.

With a well-structured VLAN setup, businesses keep networks secure and prevent threats from going network-wide. Devices and users interact only with what is necessary. VLANs offer significant protection benefits.

The Role of Network Monitoring

Watching how a network performs is very useful. Monitoring checks important things like speed, latency, and errors. It spots problems starting before outages happen.

Security systems can also monitor to catch malware and attacks. They scan traffic and emails for anything dangerous.

Good monitoring gives companies data to fix issues quickly. It helps networks stay speedy and secure. Companies should make monitoring a priority for a healthy network.

FAQs

1. How can I monitor network traffic to identify performance issues?

Use network monitoring software. It checks usage, errors, and latency and makes reports. This sees problems starting.

2. Should I completely overhaul my network cabling or just upgrade segments?

Just upgrade the most important parts first. Focus on high-traffic and slow areas. Balance costs and benefits.

3. What steps can I take to prevent network downtime during upgrades? 

Plan carefully during quiet times. Have backups ready for critical systems. Test upgrades first. Roll-out changes slowly.

Conclusion 

Good network cabling gives companies a competitive advantage. Employees can work faster and more efficiently. Customers enjoy better service. And new innovations can be leveraged quickly.

When network connections start slowing down your business, it’s time to upgrade outdated or inadequate cabling. With faster in-office communications, your business will accomplish more each day.





Source

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments

+++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++ +++